China Hot Sale Unique Special Shaped Steel Cold Drawn Steel

Product Description

1.Building type:

Portal frame construction.

2.Type of main steel structure:

The main steel structure of this kind of building uses welding H type members more, but also box type members, cross type members, T type members and other component types.

3.Secondary steel structure:

Column support, horizontal support, tie bar, stairs, guardrail, etc.

4.Cladding system:

Type C /Z purlin, round steel, bracket, casing.

The roof and wall are often made of pressed color steel plate, prefabricated wall panel, sandwich board.

5.Galvanized standard, paint type and color:

Customize according to actual architectural application requirements and your specific requirements.

C-shaped steel is with high strength and rigidity, very suitable for structures that withstand large loads and bending torsion.

What are the specifications of C-shaped steel?

C-shaped steel purlins are mainly divided into five specifications based on different height: 80, 100, 120, 140, and 160. The use scope may vary depending on the different specifications, and reasonable selection will be made according to construction design requirements. 

In addition, the length of C-shaped steel is generally determined based on the engineering construction design, but considering convenient transportation and installation conditions, the total length generally does not exceed 12 meters.

As an extension of the industrial chain of Honglu steel structure, steel purlin production lines are distributed in five major production bases, including Hefei, Anhui, Guoyang, Bozhou, Nanchuan, Chongqing, Tuanfeng, Hubei, and Ruyang, Henan.

At present, we have 60 advanced intelligent servo automatic cutting C/Z steel production lines, which can be used for punching production. The width and height can be adjusted freely, and can meet customer customization requirements as needed. The monthly output is over 50000 tons.

C-shaped steel, as a common steel with unique shapes and properties, has the characteristics of high strength, lightweight, convenient construction, economic practicality, environmental protection, energy conservation, and strong adaptability. It is widely used in various structural engineering, playing an important role in construction, bridges, mechanical manufacturing, and other fields. With the development of industry and construction, the application prospects of C-shaped steel in the future will be more broader.

Application:

1.Seismic Support
2.PV Support 
3.Lightweight building components such as roof trusses and brackets.
4.Columns, beams, and arms in mechanical light industry manufacturing

Products features:

1.Steel structure construction quality light, high intensity, span.

2.The construction period of steel structure construction is short, and the investment cost is reduced accordingly.

3.Steel structure has high fireproof and corrosion resistance.

4.Steel structure buildings are environmental friendly and no pollution is recovered.

Packing & Shipping

NO.	Description	Pictures Showed
1	All of the steel columns&beams ends and plates will be packed by the blanket to protect them from the crash in the container during the shippment.
2	To make the loading and unloading more effieciently and saving the delivery cost 40'OT is prefered to loading the steel frames
3	All the wall&roof panels will be filmed by two sides and fixed stably in the 40'HQ container.
4	All the windows and doors will be protected by the bubble rapping papers and fixed stablely in the container.

All the solutions for your:                   

Industrial steel buildings:
steel structure buildings,steel hangar kits, steel hall, steel structure storage shed, steel structure warehouse, steel structure workshop, steel construction building,processing plants
Commercial steel buildings:
Logistics Warehouse, apartment building, office building, steel hotel building, steel structure mezzanine floor, steel structure shops, aircraft hangars, steel villa frame,platform, indoor horse arena ,churches,shopping malls,water tower,structural frame,
Agriculture steel buildings:
Hay shed, machinery shed, stands, poultry houses,poultry farm building,chicken farm buildings,chicken house,broiler house,cow barn ,cow shed, dairy farm building, pig building house, goat building house, calf barn etc

You can trust us:

1. Design according to customer's requirements.
2. Manufacture under complete quality control system-ISO9001
3. Easy to assemble and dismantle.
4. .Eco-friendly material:can be used for several times and can be recycled.
5. Short construction period, long using time.
6. Permanent and temporary resistance, labor camp, office workshop, warehouse and etc.
7. Reasonable packing ensures the quality and convenience to transport and install
8. Color steel sandwich panel has a good fire proof and heat insulation performance for the characteristic ofthe color steel sheet and polystyrene material

1.In Architecture Field: 

C-shaped steel is widely used in various types of buildings, such as factories, workshops, warehouses, exhibition halls, stages, etc. Due to the lightweight, good rigidity, and high strength, C-shaped steel can be used for wall supports, crossbeams, wall beams, purlins, roof trusses, columns, lightweight steel components, etc. In addition, also be used for partition walls, suspended ceilings, etc...

2.In Engineering Field:

In the field of engineering, C-shaped steel is also a very important structural material, mainly used for supporting structures and components in bridges, tunnels, overpasses and other engineering projects. The superior performance of C-shaped steel can improve the stability and safety of buildings, making the building support more sturdy.

3. In Manufacturing Field:

C-shaped steel has high strength, light weight, and is easy to process. It can be used to manufacture various complex shaped machine components, parts, and structures, and is widely used in the manufacturing of various types of machinery and equipment, rail transit vehicles, electronic equipment, semiconductor manufacturing, and other products. For example:

Mechanical equipment manufacturing: C-shaped steel can be used to make supporting structures, transmission systems, and workbenches for mechanical equipment.

Vehicle manufacturing: C-shaped steel can be used to make frames and structural components for vehicles such as cars, trains, ships, and railways.

urniture manufacturing: C-shaped steel can be used to make supporting structures and components for furniture.

The versatility of C-shaped steel enables it to be widely used in multiple fields. Compared with traditional materials, C-shaped steel has lower production costs, is easy to process and install, and can be produced using automated production lines, making it have broad market prospects and application space in many fields.

Material Placement: Place the steel strip or coil that needs to be processed onto the material rack of the C-shaped steel forming machine.

Leveling: Use a leveling machine to level the surface of a steel strip or coil, making it smooth and even.

Forming: Put the flattened steel strip or coil into the C-shaped steel forming machine, and use the cold bending forming technology of the forming machine to process it into the shape of the C-shaped steel.

Setting: Fix the shape of C-shaped steel.

Straightening: Use a straightening machine to straighten the formed C-shaped steel, making its lines smooth and straight.

Length Measurement: Use a length measuring machine to measure the length of C-shaped steel and ensure that its length meets the requirements.

Punching Round Holes For Tie Bars: Use a punching round hole machine to punch round holes for tie bars on C-shaped steel for subsequent connection use.

Punching Elliptical Connection Holes: Use a punching elliptical connection hole machine to punch elliptical connection holes on C-shaped steel for connection with other structures.

Forming and Cutting: Use a forming cutting machine to cut the C-shaped steel, forming a single C-shaped steel product.

Material Placement ① - Leveling ② - Forming ③ - Setting ④ - Straightening ⑤ - Length Measurement ⑥ - Punching Round Hole ⑦ - Punching Elliptical Connection Hole ⑧ - Forming and Cutting